Contact us at: info@williamstriggers.com

111 SE Second Street
Atwood, IL 61913
217-578-3026

WTS Home. Trigger Work. Tech Stuff. WTS Policies. About WTS. Shipping. Links. WTS Home. Trigger Work. Tech Stuff. WTS Policies. About WTS. Shipping. Links.



WTS is bringing back the CONTOURED TRIGGER in a new way while still offering the significant degrees of ADDITIONAL trigger control on the HK 91/93/94 as our previous model.


In our previous model, the existing trigger was cut & replaced with a steel trigger that was TIG welded to the tip half of the original trigger. The NEW contour is obtained by heat treating & straightening the original factory trigger while maintaining the the same pull-weights & creep specifications as our older model.


The advantage of a straight trigger is it produces additional leverage and trigger control. This is accomplished in three basic ways:

1.) Finger pressure is applied at the TIP of the trigger where the finger has maximum leverage - thus reducing the Standard trigger work’s normal pull weight by 1 to 2#.


2.) Finger pressure is exerted directly rearward in the same direction that the trigger must move in order to cause hammer/sear disengagement.


Some semi-auto rifle trigger shapes cause the finger to exert pressure up, down or sideways against the trigger RATHER THAN directly rearward in the same direction that the trigger must move in order to cause hammer/sear disengagement.


When this mis-direction of finger pressure exists, MORE pressure must be applied to the trigger than it’s pull weight and mechanical energy values would indicate.


As an example, the issue HK 91/93 trigger shape requires approximately 7# of finger pressure to move a 6# trigger.


3.) The trigger shape allows the finger to be positioned so that it applies pressure at the first joint where maximum pressure can be applied with minimum physical effort - thus creating the same effect as using two fingers to move the trigger instead of just one.




Issue Trigger

After WTS

% of Reduction

Price






Pull Weight

9.0 - 12.0#

4.0 - 4.5#

56 - 62%


Creep

.07 - .08”

.03”

57 - 63%

$200.00

Mechanical Energy

.49 - .64”#

.12 - .14”#

82 - 83%


HK 91/93 & CLONES

STANDARD with CONTOUR*

*See also WTS’ SET triggers for even greater HK 91/93 trigger control.


Issue Trigger

After WTS

% of Reduction

Price






Pull Weight

7.0 - 8.0#

2.0 - 2.5#

56 - 57%


Creep

.07 - .08”

.03”

57 - 63%

$200.00

Mechanical Energy

.49 - .64”#

.12 - .14”#

82 - 83%


HK 94 STANDARD with CONTOUR*

HK 91/93 & CLONES SET with

CONTOUR*

*See also WTS’ SET triggers for even greater HK 91/93 trigger control.

OTHER CONTOUR OPTIONS :


WTS COMPLETE LOWER with

CONTOUR /STANDARD TRIGGER

$325.00


WTS COMPLETE LOWER with

CONTOUR/SET TRIGGER

$475.00


WTS TRIGGER PACK with  

CONTOUR/STANDARD TRIGGER

$350.00


                        ( All trigger specifications are same as above )


Issue Trigger

After WTS

% of Reduction

Price






Pull Weight

9.0 - 12.0#

4.0 - 4.5#

56 - 62%


Creep

.07 - .08”

.03”

57 - 63%

$350.00

Mechanical Energy

.49 - .64”#

.12 - .14”#

82 - 83%


#PageTopC.

WTS CONTOUR TRIGGER WORK

*See also WTS’ STANDARD triggers for another HK 94 trigger option